K40 ELECTRONICS Platinum 100 - Additional Alert Filters and Modes; Traffic Sensor and Photo Radar Detection; Auto Volume Adjustment

9
Traffic Sensor Filter (factory default off)
Your K40 can reject alerts from traffic flow sensors usually
encountered during highway driving (limited use areas).
This feature can be enabled through the Menu (page 23).
MultaRadar (MRCD/CT) Photo Radar (factory default off)
Your K40 is capable of alerting to MRCD/CT photo radar
devices (limited use areas). This feature can be enabled
through the Menu (page 23).
Auto Volume (factory default on)
Your K40 will automatically reduce volume every three sec-
onds until it reaches the “Low” setting. This feature can be
disabled through the Menu (page 22).