Installation Steps
Drill holes according to the installation
template, and put the mortise lock inside
the door, Fix mortise screws.
Notice: Make sure the mortise cable through
the hole as the picture shows.
Mortise cable
Do not make the
mortise deadbolt
come out.
Mortise screws
Cable
Pressure spring
Square shaft
Screw
Connecting
screw bolt
(Notice: the pressure
spring have to screw
in the square shaft)
Fix the connecting screw bolts on the outside
escutcheon, place the square shaft and pressure
spring into the bore.
Notice: Choose the square shaft and connecting
screw bolt in correct length according to your
door thickness.
Cylinder
Connecting
screw bolt
To Next Page
Loading...
