Kaadas S500-C - Add User Card; Delete User PIN Code; Delete User Fingerprint

Add user card
Access into master mode
Place card on the card icon area until beep sound and voice
prompt “setting succeed”.
Press [1] for user setting, then press [3] to enroll user card.
Enter 2 digital user number (00-99), and confirm with [#] key.
Delete user PIN code
Access into master mode
Press [1] for user setting, then press [4] to delete user PIN code.
Press [1] to delete single user, and enter 2 digital user number
(00-09) with [#] key to confirm. Voice prompt “Deletion succeeded”.
Press [1] for user setting, then press [4] to delete user PIN
code. And press [2] to delete all users. Voice prompt “Deletion
succeeded”.
Delete user fingerprint
Access into master mode
Press [1] for user setting, then press [5] to delete user fingerprint.
Press [1] to delete single user, and enter 2 digital user number
(00-99) with [#] key to confirm. Voice prompt “Deletion succeeded”.
Or place the related finger on the fingerprint sensor to delete until one
beep cound. Voice prompt “Deletion succeeded”.
Press [1] for user setting, then press [5] to delete user fingerprint.
And press [2] to delete all users. Voice prompt “Deletion succeeded”.
Delete user Card
Access into master mode
Press [1] for user setting, then press [6] to delete user card.
Press [1] to delete single user, and enter 2 digital user number
(00-99) with [#] key to confirm. Voice prompt “Deletion succeeded”.
Or place the related card on the card icon area to delete until one
beep cound. Voice prompt “Deletion succeeded”.
Press [1] for user setting, then press [6] to delete user card.
And press [2] to delete all users. Voice prompt “Deletion succeeded”.