Need help?Do you have a question about the Kaadas K13-3D and is the answer not in the manual?
Provides essential safety guidelines and precautions for using the smart lock.
Lists critical warnings regarding battery handling, electrical safety, and warranty implications.
Guides on proper electronic product and battery disposal according to local regulations.
Details all components included in the product package for installation reference.
Presents a detailed, exploded diagram of the lock's components for structural understanding.
Instructions on checking door opening direction and adjusting the latchbolt orientation.
Step-by-step guide for physically installing the smart lock onto the door.
Describes the features and indicators located on the front exterior panel of the smart lock.
Details the components and controls found on the interior side of the smart lock.
Explains system modes (security vs. common) and user number management before initial setup.
Instructions on how to access and activate the master mode for system configuration.
Guides on adding new PIN codes for users, including selecting user numbers.
Steps for registering facial recognition data for users.
Instructions on how to enroll fingerprint data for user authentication.
Process for adding RFID cards as access credentials for users.
Procedures for removing registered facial recognition data for specific users.
Steps to remove existing user PIN codes from the system.
Instructions on how to delete enrolled fingerprint data.
Guides on removing registered access cards from the system.
Options for configuring voice prompts and mute modes for the lock.
How to change the system language, specifically between Chinese and English.
Functionality to query system information, such as the serial number.
Details on optional network connectivity features like joining or exiting a network.
Configuration for common (single verification) and security (dual verification) modes.
How to enable or disable the energy-saving mode and its implications.
Configuration for automatic deadbolt locking upon door closure.
Explains how to unlock the door from the outside using face scan, PIN, fingerprint, or card.
Instructions for unlocking the door using the physical mechanical key.
Details on locking, unlocking, and managing privacy mode from inside the door.
How to use the inside sensor handle to unlock the door.
Controls for adjusting audio volume or muting voice prompts temporarily.
Instructions on activating and deactivating the defense mode for enhanced security.
Information on using the emergency knob for manual unlocking during system errors.
How to use an external power source via USB for emergency unlocking.
Procedure to reset the lock to its original factory default settings.
Instructions for restarting the lock system to resolve errors.
Guidance on charging the lock's battery using an external power supply.
General| Material | Zinc Alloy |
|---|---|
| Access Methods | Fingerprint, PIN Code, RFID Card, Mechanical Key |
| User Capacity | 100 |
| Fingerprint Capacity | 100 |
| PIN Code Capacity | 100 |
| RFID Card Capacity | 100 |
| Battery Life | Up to 12 months |
| Operating Temperature | 55°C |
| Compatibility | 35-55mm door thickness |
| Color | Black |
To Next Page
