Energy saving mode setting
Under master mode:
Press 6 for energy saving mode setting , then press 1 to
enable energy saving mode. Voice promot energy saving
mode entered.
Press 7 for auto mode setting, then press 1 to enable
auto mode in which the deadbolt will lock automatically
when closed door.
Press 7 for auto mode setting, then press 2 to disable
auto mode in which the deadbolt won't come out
automatically when close door. (manual mode)
Press 6 for energy saving mode setting , then press 2 to
disbale energy saving mode,Voice promot energy saving
mode exited.
Note:
In the energy saving mode , the facescan function is
disabled . The lock will enter energy saving mode
automatically when the battery is going to run out , which
please changed full charged battery if you would enable
the facescan function again.
Auto mode setting
Under master mode:
To Next Page
Loading...
