Kaadas K13-3D - Enroll User Card; Delete user face; Delete user PIN code; Delete user fingerprint

Delete user PIN code
Enroll User Card
Under master mode:
Delete user face
Under master mode:
Under master mode:
Delete user fingerprint
Under master mode:
“setting succeeded.
00-94 is normal user, and 95-99 is duress user which
works with wireless module and trigger alarm when
duress event occurs.
Press 1 for user setting, then press 4 to enroll card. Enter
2 digital user number with # to confirm.
Press 1 for user setting, then press 5 to delete user face.
Press 1 to delete single user PIN code and enter 2 digitals
user number with # to confirm or stand far away around
60cm and look at the canara till Voice prompt : deletion
succeeded.
Press 1 for user setting, then press 5 to delete user face.
then Press 2 to delete all user face . Voice prompt :
deletion succeeded.
Put the card closed to the card sensor area until one beep
sound Voice prompt : Settings succeeded.
Press 1 for user setting, then press 6 to delete user PIN
code. Press 1 to delete single user PIN code and enter 2
digitals user number with # to confirm . Voice prompt :
deletion succeeded.Press 1 for user setting, then press 4
to delete user PIN code.
Press 1 for user setting, then press 7 to delete user
fingerprint. Then press 2 to delete all user fingerprint .
Voice prompt : deletion succeeded.
Press 1 for user setting, then press 7 to delete user
fingerprint. Press 1 to delete single user fingerprint and
then enter 2 digitals user number with # to confirm or
place finger on the fingerprint sensor until one beep
sound. Voice prompt : deletion succeeded.
Press 1 for user setting, then press 56to delete user PIN
code. Press 2 to delete all user PIN code . Voice prompt :
deletion succeeded.