Need help?Do you have a question about the Kaadas K8-T and is the answer not in the manual?
General| Material | Zinc Alloy |
|---|---|
| Keyless Entry | Yes |
| Battery Life | Up to 12 Months |
| Access Methods | Fingerprint, PIN Code, Mechanical Key |
| User Capacity | 100 |
| Emergency Power Supply | Micro USB |
| Mortise Type | Standard Mortise |
| Battery Type | AA |
| Installation Type | Deadbolt |
Details on master and user PIN code setup, length, and user types.
Information on capacity and registration for cards and fingerprints.
Guidelines for correct battery installation and replacement.
Identification of key components on the outside and inside escutcheons.
Exploded diagram showing all components with their corresponding numbers and names.
Guide to identify and confirm the correct door opening direction for installation.
Instructions on how to adjust the lock components for different door opening directions.
Drilling holes and fitting the mortise lock into the door.
Fastening the mortise lock using screws.
Fitting screw bolts, pressure spring, and square shaft on the outside escutcheon.
Passing cables through the door and attaching the outside escutcheon.
Inserting square shaft and connecting cables into the inside escutcheon.
Installing batteries, covers, strike plate, and verifying all functions.
Step-by-step guide to access the master mode for device configuration.
Overview of the menu structure and options accessible via keypad input.
Procedure for adding new user PIN codes, including user number and PIN entry.
Steps to register fingerprints, including user number and finger scanning.
Process for registering RFID cards, requiring user number and card placement.
Instructions to delete single or all user PIN codes.
Instructions to delete single or all registered fingerprints.
Instructions to delete single or all registered RFID cards.
Setting normal (single verification) or security (double verification) modes.
Procedure for changing the master PIN code.
Configuring the device volume between voice and mute modes.
Selection between Chinese and English voice prompts.
Options to connect, disconnect, and manage Bluetooth functionality.
Retrieving system information, such as the serial number.
How to unlock the door using PIN code, fingerprint, or card.
Requirements for double verification (PIN+Fingerprint, PIN+Card, Fingerprint+Card) in security mode.
Using the mechanical key to open the door in case of system failure or forgotten PIN.
Understanding and switching between automatic and manual door locking modes.
Using the CLOSE button for locking, unlocking, and double locking the door.
Details on auto locking, manual locking, and double locking.
Enabling and disabling defense mode for enhanced security.
Enabling/disabling the safe handle to lock the indoor handle.
Switching between voice prompts and mute mode.
Resetting the lock to its original factory settings.
Using a power bank via Micro USB to open the lock when batteries are low.
Information on the type and quantity of batteries required for the lock.
Using the reboot button to restart the lock system when unresponsive.
To Next Page
