WWW.KAARTA.COM 2
INTRODUCTION
Congratulations on your purchase of Kaarta Stencil
®
Pro. This document serves as a guide
to get you quickly up and running with Stencil Pro and its component parts – the scanner
and controller/control pack. You will learn to operate the system, familiarize yourself with
the user interface, utilize the GNSS, and perform post-processing functions.
Visit our web site at www.kaarta.com for updates and additional information.
OVERVIEW
Stencil Pro is the innovative mobile mapping platform that goes anywhere – in just about
any environment – giving you rapid, accurate and visually stunning reality capture. An all-
in-one system to scan, process and view captured data in real time, Stencil Pro offers
integrated GNSS, panoramic 4K imagery and colorized point clouds in an IP65-rated
professional form factor. With robust surround-view perception in a wide range of light
conditions, Stencil Pro is optimized for both indoor and outdoor performance. Featuring
an impressive 32-line high-density, low-noise lidar with a range of up to 200m and a data
rate of 600,000 points per second, Stencil Pro produces a highly accurate 3D model in
minutes. New advancements are backed by proven Kaarta technology, quality, and
accuracy.
Stencil Pro’s intuitive user interface (UI) makes data capture and processing simple. The
user experience includes one-button scanning, real-time scan monitoring and
streamlined post-processing options for maximizing data clarity and usability. Remote
operation with an iPad allows for mounting Stencil Pro on a multitude of transports.
When hand-carrying, scan status can also be started and stopped with a push of a button
on the device.
KAARTA ENGINE
Real-time registered pointcloud generation
Multi-sensor input (lidar, IMU, panoramic cameras, GNSS)
Continuously self-correcting minimal drift techniques
Fast, explicit loop closure at point of scan
CARE
Like any precision instrument, take precautions to ensure a long, useful life of the device.
Treat it with care. Stencil Pro scanner has an IP or “Ingress Protection” Rating of 65,
meaning that it is dust tight and is protected against low-pressure water jets or water
projected from a nozzle. Avoid rough handling and submersion in water. Operating
temperature for Stencil Pro scanner is -10°C/14°F to 45°C/113F.
To Next Page
Loading...
