Installation Quick Guide
Kaba c-lever k2evo704yy-2011-08 5
EN
For standard use assemble the direc-
tion indicator (17a) depending on the
door direction into the coupling unit
(3) from above.
For locks that require a movement of
the lever handle up and down, a
special direction indicator (17b) has to
be assembled into the coupling unit
from above!
NOTE: To help push in the
direction indicator (17), the
spindle of the coupling unit (3)
must be turned counter
clockwise for a right hand door
and for a left hand door it must
be turned clockwise to the
dead stop!
Select the spindle (5) corresponding
the lock follower and insert it into the
coupling unit (3). Afterwards fix the
spindle (5) into the coupling unit (3)
with the fixing screw (4) from above.
Connect the motor cord of the coup-
ling unit to the plug (18) and place it
into the outside shield (1). Afterwards
put the centering sleeve (19) on the
lower thread sleeve.
AT TENT ION: The fixing screw
(4) must always face up!
Take care of the motor cord!
To Next Page
Loading...
