What to do if Kaba C-lever give a single beep but the door doesn't open?
If your Kaba Door locks system gives a single acoustic signal, but the door doesn't open, this indicates a low battery. You should perform an emergency opening and replace the batteries.
Why can't I open my door with programmed medium on Kaba C-lever?
If you cannot open the door with a programmed medium on your Kaba Door locks, it could be due to the coupling unit not being connected to the e-module or a faulty coupling unit. Check the plug connection and replace the coupling unit if necessary.
How to fix Kaba C-lever Door locks when the door cannot be opened with a medium?
If the door cannot be opened with a medium on your Kaba Door locks, the medium might not be programmed, so program the medium. You should also check the time profiles.
What to do if Kaba C-lever Door locks cannot be opened with programmed medium?
If you cannot open the door with a programmed medium on your Kaba Door locks, the system test may not have been completed correctly. Check and/or change the cable connections and coupling unit.
Why is the external lever handle always coupled on my Kaba C-lever Door locks?
If your Kaba Door locks external lever handle is always coupled, the TimePro function might be activated or the coupling unit might be faulty. Check the programming and replace the coupling unit or check the cable connection.
Why doesn't my Kaba C-lever open/close at programmed time?
If the door on your Kaba Door locks doesn't open or close at the programmed time, the system time may be lost or the programming is incorrect. Set the clock and replace the coupling unit.
What does it mean when Kaba C-lever Door locks make repeated acoustic signals?
If your Kaba Door locks system gives a repeated acoustic signal when identifying a user, the e-module time data might be missing. Check the programming.
Why is there no acoustic signal when Kaba Door locks are initialised?
If there is no acoustic signal when the Kaba Door locks system is initialised, there may be an antenna connection error or faulty electronics. Check the connection between the antenna and electronics.
General| Power Supply | Battery-powered |
|---|---|
| Access Method | RFID, PIN code, mechanical key override |
| Material | Metal (typically zinc or stainless steel) |
| Dimensions | Varies by model; typically fits standard door thicknesses. Refer to specific product datasheet. |
| Finish | Various finishes available (e.g., chrome, brass, nickel) |
| Security Features | Audit trail |
| Usage | Commercial, Residential |
To Next Page
