Kaba C-lever - Page 8

8 k2evo704yy-2011-08 Kaba c-lever
EN
Quick Guide Installation
CLICK
For a better support of the inside
shield (2), the c-lever option with the
wide shield (55mm) has a distance
sleeve between the inside shield (2)
and the inside plate (6).
Put inside shield (2) onto inside plate
(6) and fasten it with the M3 fixing
screw (13) from below.
At the final step fasten the handle
with the M6 fixing screw (12).
NOTE: Changing of batteries:
Remove M3 screw (bottom),
insert a screw driver into the
countersink and lift up the
inside shield.