EasyManua.ls Logo

Kaba E-Plex 5 00 Series - Page 2

Kaba E-Plex 5 00 Series
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPLICABLE FOR UNITED KINGDOM INSTALLATIONS ONLY
It is the responsibility of the installer to ensure that the installation of this product
complies with the relevant regulations applicable to the territory / country (UK only).
• This lock was included in a successful fire test (EN 1634-1) on a timber door, which
relied on the use of intumescent protection as detailed below.
• This protection must be replicated exactly, to ensure that the performance of a
similar fire door is not compromised.
Intumescent gasket requirements for fire doors
Product Fire Door type -
timber or mineral
composite
(to BS EN 1634-1)
Around tubular
latch or
lockcase
Behind forend Behind strike
plate (and any
back box)
Kaba Pack
E-plex 5000
E-plex 5200
E-plex 5600
E-plex 5700
1 hr - 53 mm thick
or
1
2
hr - 44 mm thick
Interdens sheet
x 1 mm thick
Interdens sheet
x 2 mm thick
Interdens sheet
x 2 mm thick
Pack 1
KABA-CYLINDER-PACK-1
E-plex 2000
PowerPlex 2000
1 hr - 53 mm thick
or
1
2
hr - 44 mm thick
Interdens sheet
x 1 mm thick
Interdens sheet
x 2 mm thick
Interdens sheet
x 1 mm thick
Pack 1
KABA-CYLINDER-PACK-1
Simplex 1000
Simplex L1000
Simplex 5000
Simplex 6200
Simplex 8100
1 hr - 53 mm thick
or
1
2
hr - 44 mm thick
Interdens sheet
x 1 mm thick
Interdens sheet
x 2 mm thick
Interdens sheet
x 2 mm thick
Pack 1
KABA-CYLINDER-PACK-1
Simplex 7100
with tubular
latch
or tubular bolt
1
2
hr - 44 mm thick Interdens sheet
x 1 mm thick
Interdens sheet
x 2 mm thick
Interdens sheet
x 1 mm thick
Pack 2
ITL-KABA-7000-1
Door types covered by the test evidence
• Single leaf or double leaf, single action timber or mineral composite doorset tested to EN 1634-1
• Minimum leaf thickness
• 60 minutes – 53 mm
• 30 minutes – 44 mm
• The leaves should have hardwood lippings of minimum 6 mm thickness and a minimum density of 630 kg/m
3
• The door frame of 30 minute doorsets shall be of softwood or hardwood with a minimum density of 450 kg/m
3
• The door frame of 60 minute doorsets shall be of softwood or hardwood with a minimum density of 630 kg/m
3
• For all 60 minute applications, the door leaf shall include non-combustible sub-facings

Related product manuals