1
Safety Regulations
Maintenance
Ban
Do not wash the product with water as
electronic circuit may break down in contact
with water. Wipe it with a dry cloth for cleaning.
Ban
Do not disassemble, reassemble or repair the
product by yourselves. This may cause damage
or malfunction of the product.
Battery Installation & Replacement
Must
Insert batteries properly with correct
polarities.If they are incorrectly inserted,it may
cause battery leakage or rupture and lead to
malfunction of the product,and also shorten
products lifetime.
Must
Must
Do not mix a new battery with a used one.This
may cause damage and shorten products
lifetime.
Must
When battery replacement alert is heard, please
replace as soon as possible.
2
Summary of Instructions
1
Reset Administration PIN Code
1
Remove 1 battery
Keep pressing “0” button
and put back the battery
2 3
Input a new admin
PIN code (6 digits)
after you hear “beeps”.
Note: Default admin PIN code is 000000
Admin PIN Code Must Be Reset With A Unique Admin PIN Code
Before Programming! Do Not Use The Default Admin PIN Code!
2
Card Key Registration
1
Input admin PIN code
Press “0” and input a card
key ID (3 digits)
2 3
Swipe the card key
on the card reader
Note: 000, 001 is admin card key ID
3
Delete an Individual Card Key
1
Input admin PIN code
or swipe admin card
Press “1” button
2
3
Input the user ID
which needs to be
deleted
/
To Next Page
Loading...
Need help?
General
