Kaba Peaks Preferred

Section 3 - 5
Key Cutting & Pinning
Peaks Preferred Spring covers
Spring covers are curved. Install them by flattening with the 3400-00-4001 staking tool.
6800-00-2006
6-pin 6800 small format interchangeable cores
6800-00-2007
7-pin 6800 small format interchangeable cores,
5340 Medeco large format interchangeable cores
6440-00-2000
key-in-knob
3425-00-2006
mortise, rim, Corbin Russwin and Yale
large format interchangeable cores
Universal pin kits
Peaks universal pin kits (3400-00-5012 for A2 and 3400-00-5004 for A4) contain all of the components required to
pin any uncombinated cylinder or core, including the 6340-00-4012 timing pin.
Non-original pins will not work properly in Kaba products and their use voids product warranty.
Components for Pinning (continued)
Peaks Classic Spring covers
Spring covers are curved. Install them by flattening with the 3400-00-4001 staking tool.
6800-00-2006
6-pin 6800 small format interchangeable cores
6800-00-2007
7-pin 6800 small format interchangeable cores,
5340 Medeco large format interchangeable cores
6440-00-2000
key-in-knob
3425-00-2006
mortise, rim, Corbin Russwin
and Yale large format inter-
changeable cores