Maintenance/Troubleshooting
Operating Instructions Powador -_EN Page
Maintenance/Troubleshooting
. Visual inspection
Inspect the inverter and the cables for visible damage and pay attention to the operating status display of the
inverter. In case of damage, notify your installer. Repairs may only be carried out by authorised electricians.
NOTE
Have your installer check for proper operation of the inverter at regular intervals.
. Cleaning the inverter externally
DANGER
Lethal voltages in the inverter
Serious injuries or death may occur if moisture gets into the inverter.
› Only use completely dry objects to clean the inverter.
› Only the exterior of the inverter should be cleaned.
Cleaning the inverter
Do not use compressed air.
Use a vacuum cleaner or a soft brush to remove dust from the bottom fan covers and from the top of the
inverter on a regular basis.
Remove dust from the ventilation inlets if necessary.
To Next Page
Loading...
Need help?
General
