32
EN
ELECTRONIC PROGRAMMABLE
CONTROL Touch control *
The symbols 1 ( AUTO ) and 0.00 start to flash if
the device is switched on for the first time.
Setting the clock
To set the current day time:
• Press the middle key 2 for at least 3
seconds.
The symbol meal preparation 3 appears on the
display
• By pressing keys 4 or 5 (
- or + ) you can
set the time.
After a few seconds the set time is confirmed by
the acoustic signal and the figures stop to flash.
The required time can be also set afterwards.
Therefore you have to:
• Press the keys 4 or 5 (
- or + )
simultaneously for 3 seconds. The time is
set as described.
*
- if available
3
Important! If you set the time anew,
previous time programs are cancelled
automatically.
To Next Page
Loading...
