Kaiser EHC User Manual

76
EN
Fault Cause
Remedial action
IMPORTANT!!!
If the faults still cannot be repaired, contact the
customer service.
Cooker doesn’t
switch on
Disturbance in power
supply
Interruption of the
stream supply
Check the
protection device of
your home
conduction. Replace
if defective.
Set the current time
on the display again
and switch on the
oven
Zeros flash on
the display
Interruption of the
stream supply
Set the current time
on the display again
The oven light
doesn’t go on
Disturbance in power
supply
Fault in the lamp
Check the
protection device of
your home
conduction. Replace
if defective.
Check if the lamp of
the oven light is
faultless. If not –
replace.
The control
lights don’t go
on
Disturbance in power
supply
Fault in the lamp
Check the
protection device of
your home
conduction. Replace
if defective.
Contact the
customer service
Clock is fast or
runs behind
Too low tension in
the house net
Check the tension
of the conduction. If
necessary –
stabilize.

Kaiser EHC Specifications

General

Brand	Kaiser
Model	EHC
Category	Oven
Language	English