Kaiweets HT106B - Maintenance and Warranty; Battery Replacement; Cleaning Instructions; Three Years Warranty

LED flashlight
Press and hold the green button for more than 2 seconds to turn the LED
light on and off. If no button is pressed and no voltage signal s detected. After 3
minutes, it will automatically shut down to save power.
Low battery indicator
If the battery voltage is less than 2.5 volts, the display will show the * E—' symbol.
If the battery voltage is less than 2.3 volts, the tester automatically tums off.
Technical specifications
Voltage: AC 12~1000V,50/60Hz
Operating temperature: ~40C
Storage temperature: -10~50'C
Humidity: <95%
Operating AlftUde: ..o S <2000m
Security level: CE, CAT IIl 1000V, CAT IV 600V
BAHEMES: ..o 2x1.5V AAA
Battery replacement
A, oo he batery cover ff bogy,remov the ateies, and inser
the positive terminal of the new battery toward the tip of the tester.
Rotate cap to the body untilitis fully seated. Before locking, do not
use the tester to test the electricity to avoid electric shock.
Use only a soft, slightly damp cloth to clean the device, never use chemicals
Cleaning
or abrasives, alcohol, ammonia or cleaners containing solvents to clean
tester. Make sure that the device is completely dry before use.
Three years warranty
The KAWEETS electronic test and measurement devices are guaranteed
for three years from the date of purchase.
CCERRHSFECE
EN18100V10