Kaiweets ST100 - Page 12

2) Wipe the case with a damp cloth or
mild detergent. Do not use abrasives
or solvents. Wipe the contacts in
each input socket with a clean swab
soaked in alcohol.
Replace battery
1) Tum off the meter power and remove
the probes.
2) Remove the screw fixing the battery
cover and remove the battery cover.
3) Remove the old battery and replace
it with @ new one of the same
specification. Please pay attention to
the battery polarity.
4) Install the battery cover back to its
original position, and fix and lock the
battery cover with screws.
(CESRHSFC 2T
12