Kaiweets ST100 - Page 2

Safety Specification
AWaming
To avoid possible electric shock or
personal injury, please strictly
observe the following specifications:
® Operate the meter according to the
manual.
Take care when measuring values
exceed 60V DC, 30V AC RMS, or
peak value 42V.
@ Ifthe meter is not normal or
damaged, please do not use it again
® Before using the meter, ensure that
the product is intact.
When the "£3" symbol is displayed
on the meter, replace the battery.
® Do not use the meter in an
environment with explosive gas or
steam or humid environment.
When using the probe, hold your
fingers behind the probe guard,
® When measuring, please connect the
null or ground wire first, then the live
wire; when disconnected, please
disconnect the live wire first, and
then the null or ground wire.