Kaiweets VT501 - Page 5

@ Hold down the Light/Backiight button and tum on the nstrument power, I wil cancel the Auto Power Off function. Restart, the
Instrument il resume the function
‘Smart Measurement Mode
Tris measirement modis enabled by default when turning on the nstrument. In this mode, DG voltage, resistance, and on-off can
e measured, and the measuring signal can be recognized automatlcaly.
1) Prass the power button to tum on the instrumen, the display will show" ", and enfer into the smart measurement mode.
2) The meter will automaticaly recognize the measured signal by toushing the probe to the power supply or the resistance.
) When th resistanco is measurod, resistance 500, the buzzer sounds.
) Read the measurement results from the display screen.
Note: miimu discemible voltage in this mode is 0.8V