Since the boiler is made of various materials, after its service life is over,
dismantle the boiler and recover as follows:
• remove metal parts to metal scrap;
• remove remaining parts to dump or waste storage sites.
11. Acceptance certificate
Kitchen solid fuel central heating boiler Kalvis-4 meets the drawings,
requirements of standards LST EN 13240:2002, ГОСТ 9817-95 and ГОСТ
20548-93 and is fit for operation.
The boiler was tested with 4,0 bar (0,4 MPa) pressure.
Factory No. _______________
Date of manufacturing _______________
Inspector ___________________
12. Product parts
1. Boiler Kalvis-4" - 1 pc
2. Thrmomanometer - 1 pc
3. Ash removal scoop - 1 pc
4. Poker - 1 pc
5. Boiler technical data sheet - 1 pc
6. Wood transportation pallet (with fastening screws) - 1 pc
To Next Page
Loading...