Kane 101 - Page 3

Before use
3
Check
Particle lter is not dirty; Water trap & probe are empty of water; Water trap & red screw
plug are tted to analyser; Probe hose is connected to gas inlet
Air purge
Press “On/O”
Analyser auto-calibrates within 90 seconds
Select “Status” on dial to view
To charge NiMH rechargeable batteries
Switch o
Connect the charger; charging indicator illuminates
Display shows “BATTERY CHARGING” if batteries need charging
Connections
2
Battery charger connection
Watertrap drain with
red screw plug
DIN connection
for optional air
flow, humidity
& temperature
probe
(KANE-AFM3)
Gas inlet
Fit spigot to
hose before
connecting to
gas inlet