Need help?Do you have a question about the Kane EGA-4 and is the answer not in the manual?
General| Resolution (CO) | 1 ppm |
|---|---|
| Resolution (CO2) | 0.1% |
| Resolution (O2) | 0.1% |
| Resolution (NO) | 1 ppm |
| Type | Combustion Gas Analyzer |
| Measurement Range (CO2) | 0 to 20% |
| Measurement Range (O2) | 0 to 25% |
| Accuracy (O2) | ±0.2% absolute |
| Operating Temperature | 0-40°C |
Specifies rechargeable Nickel Metal Hydride (NiMH) batteries.
Instructions for fitting 6 x AA NiMH rechargeable batteries.
Mentions resetting time & date after battery change.
Guidance on first charge and topping up NiMH batteries.
Advises on proper disposal of depleted batteries.
Steps to select print destination and print progress.
Instructions for storing test data and printing logged data.
Select tasks to perform measurement tests.
Change date, time, parameters, alarms, etc.
Configure logging parameters and view stored data.
Adjust analyzer settings, manage LINK devices, etc.
Perform manual air zero for accurate measurements.
Begins measurement process for exhaust gas analysis.
Starts pressure and temperature measurements.
Tests airflow, RH & temperature using KANE-DTHA2.
Tests A/C & Refrigeration systems with KANE LINK devices.
Configures and performs timed logs.
How to add the KANE-DTHA2 anemometer and enter serial number.
How to add the temperature probe clamp probe and enter serial number.
How to add the pressure probe and enter serial number.
How to add the KANE79 CO monitor and enter serial number.
To Next Page
