Need help?Do you have a question about the Kane 358 and is the answer not in the manual?
General| O2 Measurement Range | 0 to 21% |
|---|---|
| Power Source | Rechargeable Battery |
| Display | LCD |
| Measures | O2, CO, Temperature |
| Calculates | CO2 |
| Resolution | 1 ppm for CO, 0.1% for O2, 1°C for Temperature |
| Accuracy | ±1°C for Temperature |
| Operating Temperature | 0 to 50°C |
| Type | Combustion Analyzer |
Details the function of each icon on the keypad.
Details on charging the analyser using a Micro USB connector and charging times.
Details safety standards and electrical design classifications for the analyser and charger.
Steps to turn on the analyser and begin the initial zero calibration process.
Explanation of the analyser's display, backlight, and navigation buttons.
Describes the status bar's function, options, and navigation.
First step of commissioning: check appliance at max gas rate and zero analyser in fresh air.
Second step: measure CO, CO2 & RATIO levels in the exhaust outlet.
Third step: measure CO, CO2 & RATIO at minimum gas rate if possible.
Fourth step: measure flow and return temperatures from the appliance.
To Next Page
