Kane 358 - MEASURING FLUE GASSES; PRINTING

17KANE 358 MANUAL
MENU ITEMS
MENU ITEM MENU TEXT OPTIONS/COMMENTS
TIME TIME
HH:MM:SS format
E.g.. 7am = 07:00:00, 7pm = 19:00:00
DATE DATE DD/MM/YY format
HEADER HEADER Edit the 2 Line Header on your printouts.
REPORTS REPORTS
View current memory usage & view
stored reports.
EFFICIENCY EFF
Eciency calculation analyser is
set to Gross or Net —
Condensing automatically selected
based on selected fuel type
GAS SCALE ppm/mg
Select, ppm, ppm(n), mg/m3, mg/m3(n),
mg/kWh, mg/kWh(n)
PRINTER TYPE IR PRINT Select, KMIRP, IRP-2
02 REF 02 REF
Use for “Normalised” readings - Default
set to 3%, can adjust up or down
LANGUAGE LANG Selects your required language
CODE CODE
Password protected for
authorised service agents only -
Default to 000000
MEASURING FLUE GASSES
After the countdown is nished and the analyser is correctly set up, put
its ue probe into the appliance’s sampling point. The tip of the probe
should be at the centre of the ue. Use the ue probe’s depth stop cone
to set the position.
With balanced ues, make sure the probe is positioned far enough into
the ue so no air can “back ush” into the probe.
WARNING
Ensure the ue probe handle does not get hot!