To Next PageTo Next Page
Need help?Do you have a question about the Kane 455 and is the answer not in the manual?
General| Measures | CO, CO2, Temperature, Pressure |
|---|---|
| CO2 measurement range | 0 to 20% |
| Display | LCD |
| Measurement Range | CO: 0 to 2, 000 ppm; Temperature: -20 to 120°C; Pressure: ±80 mbar |
| Resolution | CO: 1 ppm; Temperature: 0.1°C; Pressure: 0.1 mbar |
| Accuracy | ±2 mbar (Pressure) |
Details on supported battery types, how to replace and charge them, and proper disposal methods.
Essential checks, fresh air purge procedure, and auto-calibration steps before initial use.
Explanation of the status display indicators and critical safety warnings for analyser operation.
Information on performing a 'bump' test to verify the instrument's functionality and sensor response.
Detailed instructions for powering the analyser on, including initial calibration, and how to switch it off.
Description of functions controlled by buttons: backlight, pump operation, pressure sensor zeroing, and data printing.
Methods for storing measurement data and navigating through the analyser's menu system using buttons.
Guide to performing combustion tests, interpreting readings like CO, CO2, O2, and efficiency.
Customizing the auxiliary display and managing (viewing/printing) previously logged combustion tests.
Instructions for conducting pressure tests, including zeroing the sensor and interpreting pressure readings.
Procedure for performing let-by and tightness tests to check gas system integrity.
How to measure flow, return, and differential temperatures using the analyser.
Guide to performing room CO tests to measure and record carbon monoxide levels.
Examples of the various printout formats generated by the KANE455 for different test types.
Configuration options for fuel type, pressure settings, and test durations within the menu system.
Managing stored tests, adjusting screen contrast, and accessing service and connectivity options.
Explanation of key parameters measured by the analyser, including their units and calculation basis.
Definitions for battery status, date, time recording, and memory full indicator.
A guide to understanding the various symbols and abbreviations used on the analyser's display.
Instructions for displaying, printing, and storing readings from the optional Nitric Oxide sensor.
