Need help?Do you have a question about the Kane 457 and is the answer not in the manual?
General| Brand | Kane |
|---|---|
| Model | 457 |
| Category | Measuring Instruments |
| Language | English |
Instructions to check water trap and particle filter before operating the analyser.
Procedure for performing a fresh air purge to auto-calibrate the analyser's sensors.
Procedure for auto-zeroing the pressure sensor using the 'Prs' setting.
Procedure for inserting the flue probe and ensuring stable readings for accurate measurements.
Step-by-step guide for conducting a pressure test, including sensor zeroing and connections.
Procedure for performing let-by and tightness tests, including stabilization.
How to measure flow, return, and differential temperatures using the analyser.
Steps to conduct a room test measuring CO and CO2 for up to 30 minutes.
Procedure for measuring ambient CO2 and CO, including zeroing with a ZeroCal capsule.
Setting up and performing unattended timed monitoring of CO and CO2 levels.
Finalizing the zeroing process and notes on capsule maintenance.
Lists common analyser issues, their causes, and recommended solutions.
Importance of annual servicing and recertification for maintaining analyser accuracy and warranty.
Detailed instructions on packing, addressing, and sending the analyser for service.
Detailed specifications for temperature, flue gas, pressure, and ambient measurements.
To Next Page
