Page 32
ROOM TEST
Select “Room Test” to measure and record CO2 and CO readings for up to 30
minutes.
Press / to start Room CO testing.
You need to choose between a 15 minute or 30 minute test.
ROOM AIR display
ROOM
AIR
.
SET TIME
15 or 30
→
Use up/down keys to toggle between 15 or
30 mins
ENTER
→
Press Enter to select
COp 0
→
Real time CO reading (ppm)
CO2p 800
→
Real time CO2 reading (ppm).
TEST 00
→
Test 00 = initial CO test in series.
Test 30 = maximum of 30 tests in series.
LOG 01
→
The CO test series is automatically stored in
the memory as a log number.
The user can stop the Room Air test at any time by pressing / .
If not stopped earlier, the Room Air test will automatically end after 15 or 30 minutes.
To Next Page
Loading...
