Kane 457 - Alternative Measurement Modes; Pressure;Temperature Menu Navigation

Page 18
USING THE KANE457 AS A THERMOMETER OR
PRESSURE METER
There are four unique displays associated with pressure and temperature testing
(Status gives the same readings in all three operating positions.)
USING THE PRESSURE/TEMPERATURE MENU
Select “Menu” on the rotary switch and navigate using the function buttons:

= Scroll up

= Scroll down = Enter
MAIN MENU SUB MENU OPTIONS / COMMENTS
SETUP PASSKEY 1111
SET TIME
HH:MM:SS format
e.g. 7 am = 07:00:00, 7pm = 19:00:00
SET DATE DD/MM/YY format
EXIT
MAIN MENU SUB MENU OPTIONS / COMMENTS
PRESSURE SMOOTH
OFF = normal response. ON
= slower (damped) response
RESOLVE
LOW = e.g. 0.01mbar resolution. HIGH
= displays to an extra decimal place
PS UNITS
mbar, mmH
2
O, Pa, kPa, PSI, mmHg, hPa, InH
2
O
TIME
LET BY = Set duration of let-by test in minutes.
Default = 1 minute
STABIL’N = Set duration of stabilisation in minutes.
Default = 1 minute
TIGHTN’S = Set duration of tightness test in minutes.
Default = 2 minute
EXIT