Kane 457 - Ambient Air Testing

Page 30
AMBIENT TESTING
There are four unique displays associated with Ambient Air testing (Status gives the
same readings in all three operating positions.)
NOTE: Whenever the analyser is switched from ambient CO2 mode to flue CO2
mode or vice versa there is a 15 second stabilisation period and the screen
shows
.
Please wait
TIME 14
→
Counts down from 15
USING THE AMBIENT MENU
Select “Menu” on the rotary switch and navigate using the function buttons:

= Scroll up

= Scroll down = Enter
MAIN
MENU
SUB
MENU
OPTIONS / COMMENTS
SETUP PASSKEY 1 1 1 1
SET TIME
HH:MM:SS format
e.g. 7 am = 07:00:00, 7pm = 19:00:00
SET DATE DD/MM/YY format
EXIT