Kane 457 - Timed Logging of Gas Concentrations

Page 35
TIMED LOGGING
There are situations when CO2 readings need to be taken over specific periods of time
to establish a profile of concentrations. The KANE457 allows for unattended timed
monitoring. Logging periods range from 4 hours to 24 hours. The sampling period is
automatically adjusted to always give 240 samples.
NOTE: only one test sequence is stored
Overall time
Sampling rate
4 hours 1 minute
8 hours 2 minutes
12 hours 3 minutes
16 hours 4 minutes
20 hours 5 minutes
24 hours 6 minutes
COp 0
→
Real time CO reading (ppm).
CO
2
p 1234
→
Real time CO
2
reading (ppm).
COv 00
→
Average CO reading (ppm)
CO
2
v 2345
→
Average CO
2
reading (ppm)
Whilst the timed log function is operation you can check the progress at any time by
pressing and holding the PUMP key
TIME TO
FINISH
3HR 59 MIN
TEST 1