Page 19
MAIN MENU SUB MENU OPTIONS / COMMENTS
REPORT PRESSURE
Stored pressure tests:
VIEW, DEL ALL, EXIT
TIGHTN’S
Stored tightness tests:
VIEW, DEL ALL, EXIT
TEMP
Stored differential temperature tests:
VIEW, DEL ALL, EXIT
EXIT
MAIN MENU SUB MENU OPTIONS / COMMENTS
SCREEN
CONTRAST Factory setting is 04
AUX
Enables users to customise the parameters on the
AUX display: LINE 1, LINE 2, LINE 3, LINE 4, EXIT
HEADER
Printout header, 2 lines, 20 characters per line:
HEADER 1, HEADER 2, EXIT
EXIT
SERVICE CODE
Password protected for authorised service agents
only. Leave set to 0000.
NOTE: To EXIT the MENU at any time simply move the rotary switch to any
position other than “Menu”. Any changes that have not been
“entered” will be ignored.
WARNING:
Before using the KANE457 to measure the pressure of a gas/air ratio valve, read the
boiler manufacturer’s instructions thoroughly. If in doubt contact the boiler
manufacturer.
After adjusting a gas/air ratio valve it is essential that the CO, CO
2
and CO/CO
2
ratio
readings are within the boiler manufacturer’s specified limits.
To Next Page
Loading...
