Kane 358 - Kane 358 Overview

4 KANE 358 MANUAL
KANE 358 OVERVIEW
The KANE358 combustion analyser measures:
● Carbon Monoxide (CO)
● Oxygen (O2)
● Pressure
● Temperature
Depending on your options these parameters are calculated:
● Carbon Dioxide (CO2)
● CO/CO2 ratio
● Combustion Eciency
● Losses
● Excess Air
● Dierential Pressure
● Dierential Temperature
Your KANE358 has a protective rubber cover with magnets for
“hands-free” operation and is supplied with a ue probe with integral
temperature sensor.
Your KANE358 has a low gas ow detector that switches o the
analyser’s pump if it detects water entering the analyser from an
overlled water trap.
Your KANE358 has a large 6 line display showing data & test results
based on your actions.
The display’s bottom line also highlights analyser status at all times.
Your KANE358 can print out test results using an optional infrared
printer or to KANE’s wireless printer App.
Your KANE358 stores up to 30 logs of any combination of
Combustion, AUX, Temperature & Pressure test results – including 10
Tightness Tests & 10 Commissioning tests
You can add 2 lines of 16 characters to your test results header.