1. Introduction
The KanexPro EXT-18GHDMIWL 100M Wireless extender is a compact HDMI
transmitter - receiver set designed to extend HD (1080p) video signals from
a source to a display which can be remotely located up to 328 feet away.
This wireless system is based on powerful low-bandwidth H.265
compression reducing the latency and signal dropouts. The system is
simple, plug and play and it’s ready to go. No drivers or complicated
installation procedures required.
Wireless extenders offer a convenient and elegant solution to delivering long
distance HDMI transmissions without the hassle of running thick unwieldy
HDMI cables through walls and furniture. Ideal for use with TV carts.
2. Features
• HDMI 1.3, HDCP 1.4 and DVI 1.0 compliant
• Supports one HDMI HD source to one HDMI HD display via wireless
transmission
• With one-way IR control
• Video resolution up to 1080P@60Hz
• Transmission distance: One-to-one connects transmission distance up to
330ft/100m. (An open environment without Wi-Fi interference.)
• Audio format supports PCM 2.0CH 32KHz/44.1KHz/48KHz
• H.265 high performance codec supported, adopting high bit rate mode
• End-to-end delays under 120Ms
• Compact design for easy and flexible installation.
3. Package Contents
5. 1x HDMI Wireless Extender (Transmitter)
5. 1x HDMI Wireless Extender (Receiver)
5. 1x IR Blaster cable (1.5 meters)
5. 1x 20~60KHz IR Receiver cable (1.5 meters)
5. 4x 5G WiFi Antennas
5. 1x 5V/1A Power Adapters
5. 1x User Manual
To Next Page
Loading...
