Kanto YU - Introduction and Package Contents; Product Overview; Whats In the Box

3
Introduction
Thank you for choosing YU Powered Speakers, designed by Kanto in Canada. YU outputs
140W peak power into 4 Ohm speakers, for remarkably bold and clean sound. Excellent
sensitivity and frequency response provide deep thumping lows and clear, scintillating
highs. YU is an amazingly exible speaker system that can accept two input sources and
connect to a subwoofer for enhanced low frequency response. Additionally, it is equipped
with the high quality aptX™ Bluetooth
®
codec. YU has a universal input power supply and
can be used worldwide from 100 Vac to 240 Vac.
We recommend you read all instructions carefully before using the system and keep them
for future reference. Kanto cannot be liable for damage or injury caused by incorrect
setup or use of this product.
This powered speaker system was carefully tested and inspected during production,
and before packaging and shipping. After unpacking, please check for any damage. It
is rare that a unit is damaged during shipping, but if this happens contact your retailer
immediately. You can also contact Kanto directly using one of the methods below.
What’s In the Box?
YU Active
Speaker
(Left Channel)
YU Passive
Speaker
(Right Channel)
Power
Cord
User
Manuals
x3
x8
Self-Adhesive
Rubber Feet
Speaker
Wire
RCA
BALANCE
BASS TREBLE
YU
Remote
x2
‘AAA’
Batteries
Email: support@kantoliving.com
Toll Free: 1-888-848-2643