Kanto YU - Connecting Audio Sources; Bluetooth Connectivity; Subwoofer Connection

7
Serial Number
ON OFF
POWER
Sub
Out
L
R
RCA
SUB
RCA (MONO)
U
Connecting Audio Sources
YU supports Bluetooth
®
4.2 with Qualcomm® aptX™ technology.
Use the appropriate audio cable to connect your audio source components to the RCA
connectors on the back of the active speaker.
Connecting a Subwoofer
YU is equipped with an RCA connector to provide output signal to a powered subwoofer.
Simply connect a single RCA cable from the SUB OUT connection on the YU to the audio
input on your subwoofer. If your subwoofer has a stereo L/R RCA input, either input will
work.
We recommend the Kanto sub8 powered subwoofer with crossover and volume controls.
Most quality subwoofers oer these controls, which allow you to customize the amount of
bass you will experience.
Look for details on the Kanto website at: www.kantoaudio.com