MACRO REMOTE
Note: After changing the name,
the user needs to disconnect and
reconnect to the new WiFi
network.
Gate Update
This page was designed to
upload software that changes
the product that the GATE
interface works with.
Once the LOAD button is pressed
the application on the GATE will
be deleted.
Gate Update Page
1. Select LOAD
2. Disconnect then reconnect
to “3A381” network
3. Press HOME button
4. Screen below should be
shown:
5. Press Gate Software Update
6. Using Browse select proper
.gat file
7. Press Submit
8. File will upload and say
Success! When complete
9. Disconnect then reconnect
to “3A381” network
10. Press HOME button
11. Update complete
Note: the GATE is not a
precision measurement
instrument. There may be some
delays.
To Next Page
Loading...
