Kärcher CV 66/2 - Default Chapter; Table of Contents

2 English
Contents
2 Safety instructions
3
2.1 Hazard levels 3
3 Technical Features
3
3.1 Operation and control 3
3.2 Vacuuming 3
3.3 Electrical system 3
4 Setup and function
4
4.1 Appliance view 4
4.2 View from below 4
5 Basic settings and service procedures
4
5.1 General information 4
5.2 Remove operating panel 5
5.3 Replacing the mains cable 5
5.4 Replace appliance switch 5
5.5 Replace wire harness 6
5.6 Removing the handle 6
5.7 Removing the appliance hood 7
5.8 Replacing the drive belt of the brush roller 9
5.9 Clean/replace the suction channel 10
5.10 Replacing the brush rollers 11
5.11 Replace the toothed belt in the brush head gear 11
5.12 Replace suction turbine 12
5.13 Remove the brush head. 12
5.14 Remove the height adjustment of the brush head 13
5.15 Remove the microswitch of the brush motor 13
5.16 Replace the pressure switch 14
6 Troubleshooting
15
7 Circuit diagram
8 Technical specifications
16
9 Special tools
16
10 Tightening torques
16