5.959-373 A 2006471 (06/03)
English CWP 2000
Operating Instructions
For technical personnel only
I System installation
I.1 Installing the system
Important!
The system may be set up only by:
– Kärcher Customer Service engineers
– Kärcher-authorised persons
To forestall danger, familiarise yourself with the following
regulations and guidelines before installing the system
and before operating it for the first time:
n ZH 1/543 Richtlinien für Fahrzeugwaschanlagen
(Guidelines for automotive washing systems)
n DIN 24 446 Safety of machines, automotive washing
systems, safety regulation requirements, inspections
(C-standard for setting the European machines
guideline 89/392/EEC)
n VDE (German Association of Professional Electrical
Engineers) regulations, specifically EN 60204
(VDE 0113)
n Local energy supply company regulations
n Current national legal regulations.
I.1.1 Wash bay requirements
Danger!
Risk of injury from moving parts of the system.
A minimum distance of 0.5 m must be maintained
between force-moved system parts and the fixed
wash bay (minimum bay dimensions, see table D.2).
When there is a risk of danger to people, property or
animals, the system must be switched off immediately
by pressing one of the "EMERGENCY STOP" buttons.
"EMERGENCY STOP" buttons are located
n on the control unit
n on the control panel for manual operation (optional)
n on the wash card reader (optional), (12.1, Fig. C.2).
If the control panel or wash card reader are not installed
immediately next to the entry to the wash bay, an
"EMERGENCY STOP" button must be installed there by
the operating company.
Caution!
Danger of stumbling in the wash bay. Places where there
is a risk of stumbling should be made clearly visible with
an illumination intensity of at least 120 lux.
I1
To Next Page
Loading...
