WHEN OPERATING THE
MACHINE BE SURE TO
UNWIND THE HOSE
COMPLETELY FROM
THE HOSE REEL.
( 1 800-537-4129 page 4
OPERATING INSTRUCTIONS
Step2 Connect garden hose to unit’s
water inlet.
Step4 Connect garden hose to the cold
water source and turn water on completely.
Step5 Plug the power cord into the power out-
let. Press “TEST”, then press “RESET” to assure
proper connection to power.Trigger the gun to
eliminate trapped air, wait for a steady flow of
water to emerge from the spray nozzle.
Step6 Turn on the pressure washer.
The motor starts only if the trigger of the
gun is pulled and shuts off when the trig-
ger is released.
Step1 Slide the spray wand extension
into the gun. Turn the wand collar onto the
gun threads until tight.
Step3 Insert the spray wand of your
choice into the wand extension. Press in
against the spring tension and twist into the
locked position.
To Next Page
