EasyManua.ls Logo

Kärcher K 280 M - GFCI Instructions; Using the Accessories; High;Low Spray Wand; Rotating Spray Wand

Kärcher K 280 M
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This brush
is ideal for
removing stubborn
dirt and stains from
finished surfaces.
Use with detergents only.
( 1 800-537-4129 page 5
USING THE ACCESSORIES
The pressure washer has two fully automatic pressure settings, depending on the wand or
nozzle installed.
This wand features a 0º pencil jet which rotates 360º for
maximum dirt cutting action, effectively increasing
cleaning performance up to 50%. This wand combines
the cleaning performance of a 0º pencil jet with the sur-
face coverage of a wide angle nozzle. Not recommend-
ed for soft materials, siding, painted surfaces, decks or
autos.
Rotating spray wand
Wash brush
WARNING TO AVOID
SERIOUS INJURY,
NEVER POINT SPRAY
NOZZLE AT YOURSELF,
OTHER PERSONS
OR ANIMALS
High/low spray wand
GFCI INSTRUCTIONS
Step1 Plug the Ground
Fault Circuit Interrupter (GFCI)
into a working outlet.
Step2 Press “TEST”, then
press “RESET” to assure proper
connection to power.
Note:
The actual
appearance
of the GFCI
may be
different from
this
illustration.
For lower pressure turn wand
collar in the minus (-) direction.
For higher pressure turn wand
collar in the plus (+) direction.
The Vario spray wand allows you to adjust the cleaning
pressure. To clean at maximum pressure, the Vario wand
must be positioned to the high pressure setting (+). To apply detergent, the wand must be
positioned to the low pressure setting (-).