English 25
Error Cause Rectification
Battery does not
charge
Charging contacts dirty. 1. Wipe the charging contacts
on both the charging station
and the cleaning robot with a
dry cloth.
Ambient temperature is be-
low 32 °F (0 °C) or above
95 °F (35 °C).
1. Use the cleaning robot at tem-
peratures above 32 °F (0 °C)
and below 95 °F (35 °C).
The cleaning ro-
bot is not return-
ing to the
charging station
Battery is discharged. 1. Manually place the cleaning
robot on the charging station
and let it charge completely.
The cleaning robot is too far
away from the charging sta-
tion.
1. Move the cleaning robot clos-
er to the charging station.
2. Manually place the cleaning
robot on the charging station.
Not enough space around
the charging station.
1. Ensure that there is sufficient
space around the charging
station, see chapter Setting
up the charging station.
There are too many obsta-
cles around the charging
station.
1. Place the charging station in a
more open area, see chapter .
The cleaning robot remaps
its environment when it has
been moved over a longer
distance.
1. Manually place the cleaning
robot on the charging station.
The cleaning robot was not
started from the charging
station. In this case, it only
returns to the place from
which it was started.
1. Manually place the cleaning
robot on the charging station.
The cleaning ro-
bot makes un-
usual sounds
A foreign object could be
caught in the brush, the side
brush or in a wheel.
1. Switch off the cleaning robot.
2. Remove the foreign object.
The cleaning ro-
bot does not re-
sume cleaning
The cleaning robot is in "Do
not disturb" mode.
1. Ensure that the cleaning robot
is not in "Do not disturb"
mode.
The cleaning robot is
charged manually or has
been placed in the charging
station.
1. Wait until the cleaning robot is
fully charged.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
