To Next PageTo Next Page
Need help?Do you have a question about the Kasco 3400JF and is the answer not in the manual?
General| Model | 3400JF |
|---|---|
| Category | Outdoor Fountain |
| Pump Type | Submersible |
| Flow Rate | 3400 GPH |
| Material | Thermoplastic |
| Motor | 1/2 HP |
| Spray Width | 15 ft |
| Housing Material | Thermoplastic |
| Power | 1/2 HP |
| Cord Length | 50 ft |
Check for visible damages and shortages in the shipment.
Guidance on assembling and installing the fountain unit.
Information about Kasco Fountains' warranty policy.
Best practices for storing the unit during the offseason.
Details on the Cypress nozzle, its collar, and bolt.
Details on the Willow nozzle and its bolt.
Details on the Juniper nozzle and its bolt.
Details on the Linden nozzle and its bolt.
Details on the Sequoia nozzle and its shorter bolt.
Steps for installing the control panel for the fountain.
Requirements for connecting power to the C-85 panel.
How to connect the aerator's power cord to the panel.
Instructions for connecting a light kit to the panel.
Final steps including testing GFCB and recording data.
Steps to test the Ground Fault Circuit Interrupter.
How to operate the timer for the aerator and lights.
Instructions for setting the current time on the timer.
How to use the timer's manual override switch modes.
Guidance on correct power source and GFI setup.
How to observe equipment for performance variations.
Best practices for storing the unit during winter.
Procedures for cleaning the fountain's exterior and motor.
Recommendations for replacing seals and oil.
Importance of checking and replacing the zinc anode.
Steps to follow for making a warranty claim.
Diagnosing issues when the GFI breaker trips.
Identifying causes for the fountain running slowly.
Troubleshooting a fountain that hums but won't start.
Addressing automatic shutoffs without timer or GFI trips.
Causes and solutions for inconsistent water flow.
Addressing nuisance trips of the GFI breaker.
