VDSL Router User Manual
27
11. Make sure that the settings below match the settings provided by your ISP.
Click on the Apply/Save button to save your configurations and reboot the
DSL router.
5.2.4 LAN Settings
From LAN, Configure the DSL Router’s IP Address and Subnet Mask for LAN
interface. In this page, you can use DHCP (Dynamic Host Configuration
Protocol) to control the assignment of IP addresses on your local
network.KW5262 support IPv4 /IPv6 dual stack.5.2.4.1 IPv4 LAN Settings
5.2.4.1 IPv4 LAN Settings
To Next Page
Loading...
