Kasda KW5262 - System Requirements; Factory Defaults; Warnings and Cautions

VDSL Router User Manual
5
 DSL ROUTER x 1
 External Splitter x 1
 Power Adapter x 1
 Telephone Line x 1
 Ethernet Cable x 1
 Antenna x 2
 Base x 1
 CD x 1
1.3 System Requirements
Before using this ROUTER, verify that you meet the following requirements:
 Subscription for DSL service. Your DSL service provider should provide
you with at least one valid IP address (static assignment or dynamic
assignment via dial-up connection).
 One or more computers, each contains an Ethernet 10/100M Base-T
network interface card (NIC).
 A hub or switch, if you are connecting the device to more than one
computer.
 For system configuration using the supplied web-based program: A web
browser such as Internet Explorer v5.0 or later, or Netscape v4.7 or
later.
1.4 Factory Defaults
The device is configured with the following factory defaults:
 IP Address: 192.168.1.1
 Subnet Mask: 255.255.255.0
 User Name: admin
 Password: adslroot
 VPI/VCI: According to local information
1.5 Warnings and Cautions
 Never install telephone wiring during storm. Avoid using a telephone
during an electrical storm. There might be a risk of electric shock from
lightening.