RECORDING A SONG
ABOUT RECORDING
RECORDING PAD PERFORMANCES
RECORDING PERFORMANCES ACCOMPANIED WITH A SONG
PLAYING BACK YOUR RECORDED PERFORMANCE
RECORDING STANDBY
In NORMAL mode, the digital drum allows you to quickly record your perfor-
mance as you play the pads. There are two ways to start recording a new song:
Press the [START/STOP] button - Hit any pad
On Recording Standby, you can use the [ - ] or [ + ] button to adjust the parame-
ters(as shown to the right).
1. Press the [RECORD] button, enter recording standby.
The [RECORD] LED will ash.
2. Press the [START/STOP] button or strike the pad.
Recording will start. The RECORD LED will turn on. After Count-in, the
display will show: Now you will record your performance.
3. Press the [START/STOP] button again, or press the [RECORD] button.
Stop recording, the [RECORD] LED will turn o.
If you want to record your performance accompanied with a song, rst set the
parameters (Song Number and Drum o) before start to record. The display
will be as shown to the right:
For details on setting, refer to Recording Standby. Recording operations are
as mentioned above.
1. Press the [PLAY] button. Play back your recording. The display will show:
2. Press the [PLAY] button again. Stop playing back your performance.
Use the [PAGE] button to scroll through the various record parameters and the [ - ] or [ + ]
button to adjust the value.
Page1: Setting the song accompanied or not
Page2: Selecting the drum kit that you want to record.
Page3: Setting the recording tempo
Page4: Setting the time signature
Page5: Setting the interval
Page6: Setting the drums in songs muted or not
Page7: : Setting a measure count-in inserted or not before recording.
21
To Next Page
Loading...
