KaVo Dexis Titanium User Manual

Sensor User Manual
Sensor Benutzerhandbuch
Capteur Manuel de l’utilisateur

KaVo Dexis Titanium Specifications

General

Connectivity	USB
Image Resolution	20 lp/mm
Material	Titanium housing
Type	Intraoral Sensor
Compatibility	Dexis sensors and other digital radiography systems

Summary

Introduction to the DEXIS Titanium Sensor System

Essential Performance of the DEXIS Titanium Sensor

Key capabilities of the sensor system for image recognition and alignment.

Indications for Use of the DEXIS Sensor

Intended use of the sensor for acquiring dental intra-oral radiographic images.

Installation, Care, and Maintenance of the DEXIS System

Protection Against Cybersecurity Threats

Installing the DEXIS Titanium Sensor

Covers connecting the sensor and installing the device driver.

Adjusting the X-ray Source

Discusses compatibility with X-ray units and generator settings.

X-ray Generator Settings

Proper Care of the DEXIS Titanium Sensor

Provides guidelines for handling and preventing damage to the sensor.

Proper Care of the DEXIS Titanium Sensor Holders

Details disinfection procedures for sensor holders, including autoclave use.

Image Quality Assurance

Lists factors affecting image quality and recommends periodic review.

Clinical Use of DEXIS Titanium Sensor Holders

Positioning System Assembly

Correct Placement Using the Paralleling Technique

Details the paralleling technique for sensor positioning in the mouth.

Cable Protection