What to do if KaVo Dental patient chair does not move?
If the KaVo patient chair isn't moving, check the safety shutoffs and determine the reason for the shutoff. Also, check if the foot control is activated and eliminate the reason for the shutoff.
What to do if KaVo Dental equipment is not working?
If your KaVo dental equipment isn't working, first, ensure the main switch is turned on. If the issue persists, unplug the unit and check the main service fuse located next to the master switch. Use a screwdriver to open the bayonet lock and replace the microfuse with the correct type: T 6.3 H (Mat. no. 0.223.2783) for 220-240 V AC or T 10 H (Mat. no. 1.007.2529) for 100-130 V AC. Then, re-close the bayonet closure with the screwdriver.
Why is there no spray in my KaVo ESTETICA E70 Vision Dental equipment instruments?
If there's no spray in your KaVo dental instruments, make sure that spray is preselected. Also, check that the spray regulation on the instrument is open and that the main water valve in the office is open. Finally, verify that the compressor is turned on.
What to do if KaVo Dental suction hoses do not have any suction?
If the suction hoses of your KaVo dental equipment aren't providing suction, start by ensuring the suction machine is turned on and functioning correctly. Next, check that the slide valves in the conical sections of the suction hoses are open. Also, inspect the sieves in the selective valves for any blockages and exchange the sieve if needed. Finally, ensure that the base switch is not actuated.
What to do if KaVo Dental treatment unit is not connected to the wireless foot control?
If your KaVo treatment unit isn't connecting to the wireless foot control and is emitting a tone, first check if the foot control is turned on using the on/off switch. If it is on, ensure the foot control is within range of the treatment unit. Also, check the status display: a yellow light indicates a low battery (charge it), and no display indicates a malfunction.
What to do if there is water in the return air filter in KaVo ESTETICA E70 Vision Dental equipment?
If you find water in the return air filter of your KaVo dental equipment, the O-rings of the MULTIflex coupling might be damaged. Replace all the O-rings on the MULTIflex coupling.
What to do if KaVo ESTETICA E70 Vision display without indicator?
If the display of your KaVo dental equipment shows no indicator, try turning the device off and on again. If the problem persists, it may be due to a bus or hardware error.
What to do if KaVo Dental operating device has no function?
If your KaVo dental operating device isn't functioning, try turning the device off and on again. If the problem continues, it might be a bus or hardware error.
What to do if several handpieces are simultaneously activated in KaVo ESTETICA E70 Vision Dental equipment?
If several handpieces are being activated simultaneously on your KaVo dental equipment, stop working, as this indicates a hardware error.
General| Model | ESTETICA E70 Vision |
|---|---|
| Manufacturer | KaVo |
| Adjustable Backrest | Yes |
| Power Supply | 220-240 V |
| Frequency | 50/60 Hz |
| Water Unit | Integrated |
| Chair Positions | Multiple |
| Control System | Touchscreen |
| Lighting | LED |
| Operating Modes | Multiple operating modes |
| Cuspidor | Integrated |
| Color Options | Various colors available |
To Next Page
