Why is there no coolant in the instrument of my KaVo Medical Equipment?
If there is no coolant in the instrument of your KaVo Medical Equipment, it could be because the coolant flow is not preselected.
What causes a leaky surgical hose on KaVo Medical Equipment?
If the surgical hose on your KaVo Medical Equipment is leaky, it could be due to a worn or defective coolant hose. Consider replacing the coolant hose. Alternatively, try shortening the hose by approximately 6 mm.
Why is coolant dripping from my KaVo Medical Equipment?
If you notice coolant dripping from your KaVo Medical Equipment, it might be due to a clogged coolant line or restricted flow. Check the coolant hose and connecting nipple to see if they are blocked.
How to fix no light on the handpiece of KaVo Medical Equipment?
General| Brand | KaVo |
|---|---|
| Model | INTRAsurg 300 |
| Category | Medical Equipment |
| Language | English |
Overview of user information and symbols.
Defines the intended users of the document.
Provides contact information for service and support.
Outlines the terms and conditions of the product warranty.
Instructions for safely transporting and storing the device.
Explains warning symbols, structure, and danger levels.
Details the intended use and operational guidelines.
Overview of the INTRAsurg 300/300 plus device components.
Description of the device's control panel and buttons.
Details the functions and operation of the foot control pedal.
Information presented on the device's rating plate.
Specifications and technical details of the device.
Instructions for connecting the device to the power supply.
Steps for safely unpacking the device and its components.
Procedure for setting the correct mains input voltage.
Guide for attaching the bottle holder and using coolant containers.
Steps for connecting the motor and coolant reservoir.
General operating procedures and startup instructions.
Information and procedures for using surgical motors.
Instructions for using the device in "Free Use" mode.
Guide for using the device's programmable functions.
Special functions available only on the 300 Plus model.
Procedures for cleaning the device components.
Instructions for disinfecting device parts.
Guidelines for sterilising the device using an autoclave.
Procedure for replacing the pump hose.
Instructions for replacing the coolant hose.
Table for recording device settings before and after service.
Declaration regarding electromagnetic emissions.
Declaration regarding electromagnetic interference immunity.
To Next Page